§ 8175-5.13.5. Zoning Clearance.

A Zoning Clearance sign permit is required for all of the following signs:

a.

A physical modification or alteration of an existing permitted sign or legal nonconforming sign if the change is consistent with the development standards in Section 8175-5.

b.

Signs affixed directly to a non-residential structure, other than public works facilities, in compliance with Section 8174-6.3.4 including but not limited to:

1.

Identification signs larger than two (2) square feet in sign area affixed directly to the exterior wall of a structure or building, or identification signs larger than six (6) square feet in sign area if affixed directly to the exterior wall of a structure or building for agricultural uses (i.e., produce stands, barns, stables, etc.). See Section 8175-5.13.9.1 for allowable number and dimensions.

2.

Memorial tablets or signs larger than two (2) square feet but less than ten (10) square feet. Such signs may include names of buildings and dates of construction, when cut into any masonry surface or inlaid so as to be part of the building, or when constructed of bronze or similar noncombustible material affixed to the building.

3.

Projecting sign (See Section 8175-5.13.10.18).

4.

Window signs ten (10) square feet in area or twenty-five (25) percent of the window area, whichever is less; consistent with the provisions of Section 8175-5.13.10.22.

c.

Replacement of existing permitted signs (other than legal nonconforming signs) destroyed by a disaster pursuant to Section 8174-6.3.5.

d.

Promotional temporary signs provided that:

1.

Such signs are only displayed on a developed parcel zoned Coastal Commercial (CC) for a maximum of thirty (30) days;

2.

Such signs are not located in the clear sight triangle pursuant to Section 8175-3.8; and

3.

Such signs are located not less than five (5) feet from the inside line of the sidewalk or, if there is no sidewalk, from the property line.

(Ord. No. 4492, § 3, 6-21-2016)