§ 8106-1.2. Development standards for uses and structures in commercial, industrial and special purpose zones.

Zone	Minimum Lot Area (Gross)	Maximum Percentage of Building Coverage	Required Minimum Setbacks (a)		Maximum Structure Height
			From Street	Each Interior Yard	Main Structure	Exceptions (Main Structure)	Accessory Structure
CO	No requirement	See General Plan	Front: 20′ Side: 5′	None required, but if provided, or if any side is adjacent to R-zoned property then 10 feet on that side	25′	Height may be increased (to maximum 60′) with Planning Commission C.U.P.	As specified by permit
C1			5 feet on Corner Lots (d)	5 feet if adjacent to an R-zone; otherwise as specified by permit (d)
CPD					35′
TP	160 acres (b)			As specified by permit	25′
M1	10,000 sq. ft.		20′ (c)	5 feet if adjacent to an R-zone; otherwise as specified by permit (c, d)	30′	May be increased to 60′ with Planning Director approval
M2			15′ (c)
M3			10′(c)		As specified by permit	Maximum 60′ when located within 100′ of R-zoned property
TC	As specified in the Old Town Saticoy Development Code (Appendix B of the Saticoy Area Plan).
IND	As specified in the Old Town Saticoy Development Code (Appendix B of the Saticoy Area Plan).
SP	As established by Specific Plan (See Section 8109-4.2).

 

(a) See Section 8106-5 for exceptions. See Section 1806-4.3 for flag lot setbacks.

(b) See Section 8109-4.3.6.

(c) A 30-foot setback, in conjunction with appropriate opaque screening, may be required (1) when the industrial site is adjacent to or across the street from an R-zone; (2) to maintain uniformity with existing adjacent development; or (3) on the basis of the configuration of the industrial site.

(d) Am. Ord. 3810-5/5/87

(Add Ord. 3730—5/7/85; Am. Ord. 4018—12/15/92; Ord. No. 4479, § 5, 9-22-2015)