§ 8119-1.4.9. Industrial Building.

A "block-form" building designed for occupancy primarily by manufacturing, workshop, and warehouse uses. Industrial Buildings may also include office or limited retail uses. The Industrial Building type is intended to accommodate limited indoor/outdoor loading and staging areas for manufacturing and warehouse uses. The outdoor loading areas and parking must be located to the side or the rear of the building.

All Industrial Buildings shall meet the standards listed in Table 1.4.9. Also see Sec. 8119-1.8.5(d) for additional requirements for industrial buildings located adjacent to residentially zoned parcels.

Industrial Building Type Diagram

Illustrative Photo.

TABLE 1.4.9. INDUSTRIAL BUILDING
STANDARD	ZONE
	TC	R/MU	RES	IND
1. LOT SIZE
A. Width	Not allowed			260 ft. max.
B. Depth				260 ft. max.
2. BUILDING SIZE AND MASSING
A. Height (max.)	Not allowed			2 stories / 45 ft.
B. Length along front				200 ft. max.
C. Length along side yard				220 ft. max.
D. Unit size (sf)				n/a
3. PEDESTRIAN ACCESS FROM PRIMARY OR SIDE STREET
A. Ground Floor	Not allowed			Direct from sidewalk
B. Second Floor				Interior or exterior stair
4. PARKING ACCESS
A. Lot with alley	Not allowed			n/a
B. Corner lot without alley				Max. 30 ft. wide driveway connected to a Side Street
C. Interior lot without alley				Max. 30 ft. wide driveway connected to a Primary Street
5. PARKING TYPE
A. Type				Surface lot, garage, or carport
6. OPEN SPACE
A. Primary and Side Street Setbacks	Not allowed			Landscaping required in Primary and Side Street setbacks
7. FRONTAGE
	Not allowed			See Sec. 8119-1.5

 

[1] Driveway standards may be adjusted as per requirements of the Ventura County Fire Protection District.

(Ord. No. 4479, § 8(App. B), 9-22-2015)